dmesg - FUJITSU MHZ2250B - Intel Core 2 Duo T9300
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-32-generic (buildd@lgw01-43) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #37~14.04.1-Ubuntu SMP Thu Oct 22 09:41:40 UTC 2015 (Ubuntu 3.19.0-32.37~14.04.1-generic 3.19.8-ckt7)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dfe71fff] usable
BIOS-e820: [mem 0x00000000dfe72000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed1bfff] reserved
BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000feda0000-0x00000000feda5fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Dell Inc. XPS M1530 / , BIOS A12 11/19/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FE0000000 write-back
3 base 100000000 mask FE0000000 write-back
4 base 0DFF00000 mask FFFF00000 uncachable
5 disabled
6 disabled
7 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 512MB, type WB
reg 4, base: 3583MB, range: 1MB, type UC
total RAM covered: 4095M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 1G num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3583MB, range: 1MB, type UC
reg 2, base: 3584MB, range: 512MB, type UC
reg 3, base: 4GB, range: 512MB, type WB
e820: update [mem 0xdff00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdfe72 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x11fe00000-0x11fffffff]
[mem 0x11fe00000-0x11fffffff] page 2M
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x11fdfffff]
[mem 0x100000000-0x11fdfffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdfe71fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xdfdfffff] page 2M
[mem 0xdfe00000-0xdfe71fff] page 4k
RAMDISK: [mem 0x35a2a000-0x36d0cfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FBC90 000024 (v02 DELL )
ACPI: XSDT 0x00000000DFE73A00 000064 (v01 DELL M08 27D80B13 ASL 00000061)
ACPI: FACP 0x00000000DFE7389C 0000F4 (v04 DELL M08 27D80B13 ASL 00000061)
ACPI: DSDT 0x00000000DFE74000 004BC2 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
ACPI: FACS 0x00000000DFE82800 000040
ACPI: FACS 0x00000000DFE82800 000040
ACPI: HPET 0x00000000DFE73B00 000038 (v01 DELL M08 00000001 ASL 00000061)
ACPI: APIC 0x00000000DFE73C00 000068 (v01 DELL M08 27D80B13 ASL 00000047)
ACPI: MCFG 0x00000000DFE73BC0 00003E (v16 DELL M08 27D80B13 ASL 00000061)
ACPI: SLIC 0x00000000DFE73C9C 000176 (v01 DELL M08 27D80B13 ASL 00000061)
ACPI: OSFR 0x00000000DFE73200 00002C (v01 DELL M08 27D80B13 ASL 00000061)
ACPI: BOOT 0x00000000DFE737C0 000028 (v01 DELL M08 27D80B13 ASL 00000061)
ACPI: SSDT 0x00000000DFE7217E 0004CC (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
NODE_DATA(0) allocated [mem 0x11fff7000-0x11fffbfff]
[ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x11fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xdfe71fff]
node 0: [mem 0x100000000-0x11fffffff]
Initmem setup node 0 [mem 0x00001000-0x11fffffff]
On node 0 totalpages: 1048080
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 14266 pages used for memmap
DMA32 zone: 913010 pages, LIFO batch:31
Normal zone: 2048 pages used for memmap
Normal zone: 131072 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdfe72000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfed17fff]
PM: Registered nosave memory: [mem 0xfed18000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfed9ffff]
PM: Registered nosave memory: [mem 0xfeda0000-0xfeda5fff]
PM: Registered nosave memory: [mem 0xfeda6000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee0ffff]
PM: Registered nosave memory: [mem 0xfee10000-0xffdfffff]
PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88011fc00000 s86144 r8192 d32640 u1048576
pcpu-alloc: s86144 r8192 d32640 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031681
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4024544K/4192320K available (7920K kernel code, 1174K rwdata, 3756K rodata, 1408K init, 1292K bss, 167776K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:16640 nr_irqs:440 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-1.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2493.870 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4987.74 BogoMIPS (lpj=9975480)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
ftrace: allocating 30021 entries in 118 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz (fam: 06, model: 17, stepping: 06)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (9975.48 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
pinctrl core: initialized pinctrl subsystem
RTC time: 1:33:53, date: 11/08/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88011A590800 0002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88011A598000 0005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88011AAECE00 0000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88011AB25780 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff]
pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfebfffff]
pci_bus 0000:00: root bus resource [mem 0xfec10000-0xfecfffff]
pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1ffff]
pci_bus 0000:00: root bus resource [mem 0xfed90000-0xfed9ffff]
pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfedfffff]
pci_bus 0000:00: root bus resource [mem 0xfee10000-0xff9fffff]
pci_bus 0000:00: root bus resource [mem 0xffc00000-0xffdfffff]
pci_bus 0000:00: root bus resource [mem 0x120000000-0x317ffffff]
pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x6f20-0x6f3f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x6f00-0x6f1f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfed1c400-0xfed1c7ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf6ffc000-0xf6ffffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x6f80-0x6f9f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x6f60-0x6f7f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x6f40-0x6f5f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfed1c000-0xfed1c3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io 0x1000-0x107f]: address conflict with ACPI CPU throttle [io 0x1010-0x1015]
pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c (mask 0007)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: reg 0x14: [io 0x03f4-0x03f7]
pci 0000:00:1f.1: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.1: reg 0x1c: [io 0x0374-0x0377]
pci 0000:00:1f.1: reg 0x20: [io 0x6fa0-0x6faf]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x6eb0-0x6eb7]
pci 0000:00:1f.2: reg 0x14: [io 0x6eb8-0x6ebb]
pci 0000:00:1f.2: reg 0x18: [io 0x6ec0-0x6ec7]
pci 0000:00:1f.2: reg 0x1c: [io 0x6ec8-0x6ecb]
pci 0000:00:1f.2: reg 0x20: [io 0x6ee0-0x6eff]
pci 0000:00:1f.2: reg 0x24: [mem 0xf6ffb800-0xf6ffbfff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf6ffb700-0xf6ffb7ff]
pci 0000:00:1f.3: reg 0x20: [io 0x10c0-0x10df]
pci 0000:01:00.0: [10de:0407] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf5000000-0xf5ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf2000000-0xf3ffffff 64bit]
pci 0000:01:00.0: reg 0x24: [io 0xef00-0xef7f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf6efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:09:00.0: [11ab:4354] type 00 class 0x020000
pci 0000:09:00.0: reg 0x10: [mem 0xf1ffc000-0xf1ffffff 64bit]
pci 0000:09:00.0: reg 0x18: [io 0xde00-0xdeff]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 09]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xf1f00000-0xf1ffffff]
pci 0000:0b:00.0: [8086:4229] type 00 class 0x028000
pci 0000:0b:00.0: reg 0x10: [mem 0xf1efe000-0xf1efffff 64bit]
pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 0b]
pci 0000:00:1c.1: bridge window [mem 0xf1e00000-0xf1efffff]
acpiphp: Slot [1] registered
pci 0000:00:1c.4: PCI bridge to [bus 0c-0d]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xf1c00000-0xf1dfffff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:03:09.0: [1180:0832] type 00 class 0x0c0010
pci 0000:03:09.0: reg 0x10: [mem 0xf1bff800-0xf1bfffff]
pci 0000:03:09.0: supports D1 D2
pci 0000:03:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:09.1: [1180:0822] type 00 class 0x080501
pci 0000:03:09.1: reg 0x10: [mem 0xf1bff500-0xf1bff5ff]
pci 0000:03:09.1: supports D1 D2
pci 0000:03:09.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:09.2: [1180:0592] type 00 class 0x088000
pci 0000:03:09.2: reg 0x10: [mem 0xf1bff600-0xf1bff6ff]
pci 0000:03:09.2: supports D1 D2
pci 0000:03:09.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:09.3: [1180:0852] type 00 class 0x088000
pci 0000:03:09.3: reg 0x10: [mem 0xf1bff700-0xf1bff7ff]
pci 0000:03:09.3: supports D1 D2
pci 0000:03:09.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf1b00000-0xf1bfffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfebfffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed1c000-0xfed1ffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed90000-0xfed9ffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfedfffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xff9fffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xffc00000-0xffdfffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x120000000-0x317ffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: Enabled 3 GPEs in block 00 to 1F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xdfe72000-0xdfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xff800000-0xff8fffff] has been reserved
system 00:00: [mem 0xffc00000-0xffcfffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x0c80-0x0cff] could not be reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:06: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
pnp 00:06: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
system 00:06: [io 0x0900-0x097f] has been reserved
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:07: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
pnp 00:07: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
pnp 00:07: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
system 00:07: [io 0xf400-0xf4fe] has been reserved
system 00:07: [io 0x1080-0x10bf] has been reserved
system 00:07: [io 0x10c0-0x10df] has been reserved
system 00:07: [io 0x0809] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:08: [mem 0x00000000-0x0009efff] could not be reserved
system 00:08: [mem 0x0009f000-0x0009ffff] could not be reserved
system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:08: [mem 0x00100000-0xdfe71fff] could not be reserved
system 00:08: [mem 0xdfe72000-0xdfefffff] has been reserved
system 00:08: [mem 0xdff00000-0xdfffffff] has been reserved
system 00:08: [mem 0xffe00000-0xffffffff] has been reserved
system 00:08: [mem 0xffa00000-0xffbfffff] has been reserved
system 00:08: [mem 0xfec00000-0xfec0ffff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:08: [mem 0xfeda0000-0xfeda3fff] has been reserved
system 00:08: [mem 0xfeda4000-0xfeda4fff] has been reserved
system 00:08: [mem 0xfeda5000-0xfeda5fff] has been reserved
system 00:08: [mem 0xfeda6000-0xfeda6fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed1bfff] has been reserved
system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000
pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000
pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 15: assigned [mem 0x120000000-0x1201fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0x120200000-0x1203fffff 64bit pref]
pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf6efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 09]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xf1f00000-0xf1ffffff]
pci 0000:00:1c.0: bridge window [mem 0x120000000-0x1201fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 0b]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0xf1e00000-0xf1efffff]
pci 0000:00:1c.1: bridge window [mem 0x120200000-0x1203fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0c-0d]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xf1c00000-0xf1dfffff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03]
pci 0000:00:1e.0: bridge window [mem 0xf1b00000-0xf1bfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff]
pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff]
pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff]
pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff]
pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff]
pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff]
pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff]
pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff]
pci_bus 0000:00: resource 16 [mem 0x120000000-0x317ffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf6efffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:09: resource 1 [mem 0xf1f00000-0xf1ffffff]
pci_bus 0000:09: resource 2 [mem 0x120000000-0x1201fffff 64bit pref]
pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:0b: resource 1 [mem 0xf1e00000-0xf1efffff]
pci_bus 0000:0b: resource 2 [mem 0x120200000-0x1203fffff 64bit pref]
pci_bus 0000:0c: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:0c: resource 1 [mem 0xf1c00000-0xf1dfffff]
pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf1b00000-0xf1bfffff]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xe0000000-0xf7ffffff]
pci_bus 0000:03: resource 9 [mem 0xfc000000-0xfebfffff]
pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff]
pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff]
pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff]
pci_bus 0000:03: resource 13 [mem 0xfeda7000-0xfedfffff]
pci_bus 0000:03: resource 14 [mem 0xfee10000-0xff9fffff]
pci_bus 0000:03: resource 15 [mem 0xffc00000-0xffdfffff]
pci_bus 0000:03: resource 16 [mem 0x120000000-0x317ffffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19340K (ffff880035a2a000 - ffff880036d0d000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdbe72000-0xdfe72000] (64MB) mapped at [ffff8800dbe72000-ffff8800dfe71fff]
Simple Boot Flag at 0x79 set to 0x1
microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 512 (order: 3, 32768 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1446946433.572:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1280x800x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
mtrr: type mismatch for f3000000,400000 old: write-back new: write-combining
mtrr: type mismatch for f3000000,200000 old: write-back new: write-combining
mtrr: type mismatch for f3000000,100000 old: write-back new: write-combining
mtrr: type mismatch for f3000000,80000 old: write-back new: write-combining
mtrr: type mismatch for f3000000,40000 old: write-back new: write-combining
mtrr: type mismatch for f3000000,20000 old: write-back new: write-combining
mtrr: type mismatch for f3000000,10000 old: write-back new: write-combining
mtrr: type mismatch for f3000000,8000 old: write-back new: write-combining
mtrr: type mismatch for f3000000,4000 old: write-back new: write-combining
mtrr: type mismatch for f3000000,2000 old: write-back new: write-combining
mtrr: type mismatch for f3000000,1000 old: write-back new: write-combining
vesafb: framebuffer at 0xf3000000, mapped to 0xffffc90004780000, using 4032k, total 4032k
Console: switching to colour frame buffer device 160x50
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM] (70 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT0] (battery absent)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ata2: port disabled--ignoring
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 22, io mem 0xfed1c400
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-32-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 20, io mem 0xfed1c000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-32-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-32-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.19.0-32-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.19.0-32-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.19.0-32-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.19.0-32-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 0c8befe0c1e289e4d8990926117ada3bdfeb419c'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 7:762:558
tty ttyS30: hash matches
misc vga_arbiter: hash matches
rtc_cmos 00:03: setting system clock to 2015-11-08 01:33:54 UTC (1446946434)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
ata1.00: ATAPI: Optiarc DVD+/-RW AD-7640A, JD05, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM Optiarc DVD+-RW AD-7640A JD05 PQ: 0 ANSI: 5
sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
Freeing unused kernel memory: 340K (ffff880001bab000 - ffff880001c00000)
systemd-udevd[109]: starting version 204
sky2: driver version 1.30
sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0
sky2 0000:09:00.0 eth0: addr 00:21:9b:cd:fb:66
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:03:09.1: SDHCI controller found [1180:0822] (rev 22)
sdhci-pci 0000:03:09.1: No vmmc regulator found
sdhci-pci 0000:03:09.1: No vqmmc regulator found
mmc0: SDHCI controller on PCI [0000:03:09.1] using DMA
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
ata3: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffb900 irq 29
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffba00 irq 29
firewire_ohci 0000:03:09.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=05a9, idProduct=2640
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: Laptop Integrated Webcam
usb 1-1: Manufacturer: OmniVision Technologies, Inc. -2640-08.05.12.1
usb 7-2: new full-speed USB device number 2 using uhci_hcd
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: FUJITSU MHZ2250BH G2, 00850009, max UDMA/100
ata3.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA FUJITSU MHZ2250B 0009 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
usb 7-2: New USB device found, idVendor=0a5c, idProduct=4500
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: BCM2045B2
usb 7-2: Manufacturer: Broadcom
hub 7-2:1.0: USB hub found
hub 7-2:1.0: 3 ports detected
usb 3-2: new full-speed USB device number 2 using uhci_hcd
firewire_core 0000:03:09.0: created device fw0: GUID 474fc0003d2c0de1, S400
usb 3-2: New USB device found, idVendor=0483, idProduct=2016
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Biometric Coprocessor
usb 3-2: Manufacturer: STMicroelectronics
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 7-2.2: new full-speed USB device number 3 using uhci_hcd
usb 7-2.2: New USB device found, idVendor=0a5c, idProduct=4502
usb 7-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0
usb 7-2.2: Manufacturer: Broadcom Corp
usb 7-2.3: new full-speed USB device number 4 using uhci_hcd
usb 7-2.3: New USB device found, idVendor=0a5c, idProduct=4503
usb 7-2.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0
usb 7-2.3: Manufacturer: Broadcom Corp
random: init urandom read with 92 bits of entropy available
input: DualPoint Stick as /devices/platform/i8042/serio1/input/input6
input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input5
random: nonblocking pool is initialized
Adding 4190204k swap on /dev/sda5. Priority:-1 extents:1 across:4190204k FS
systemd-udevd[288]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
acpi device:30: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:2d/LNXVIDEO:00/input/input7
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
wmi: Mapper loaded
r592: driver successfully loaded
[drm] Initialized drm 1.1.0 20060810
cfg80211: Calling CRDA to update world regulatory domain
iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
iwl4965: Copyright(c) 2003-2011 Intel Corporation
iwl4965 0000:0b:00.0: can't disable ASPM; OS doesn't have ASPM control
iwl4965 0000:0b:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
iwl4965 0000:0b:00.0: device EEPROM VER=0x36, CALIB=0x5
iwl4965 0000:0b:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
kvm: disabled by bios
kvm: disabled by bios
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
r852: driver loaded successfully
iwl4965 0000:0b:00.0: loaded firmware version 228.61.2.24
checking generic (f3000000 3f0000) vs hw (e0000000 10000000)
checking generic (f3000000 3f0000) vs hw (f2000000 2000000)
fb: switching to nouveaufb from VESA VGA
Console: switching to colour dummy device 80x25
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x084700a2
nouveau [ DEVICE][0000:01:00.0] Chipset: G84 (NV84)
nouveau [ DEVICE][0000:01:00.0] Family : NV50
nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
nouveau [ VBIOS][0000:01:00.0] BIT signature found
nouveau [ VBIOS][0000:01:00.0] version 60.84.5e.00.08
nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
nouveau [ PFB][0000:01:00.0] RAM type: GDDR3
nouveau [ PFB][0000:01:00.0] RAM size: 256 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 1892 tags
nouveau [ VOLT][0000:01:00.0] GPU voltage: 1150000uv
ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
nouveau [ PTHERM][0000:01:00.0] fan management: automatic
nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
nouveau [ CLK][0000:01:00.0] 20: core 169 MHz shader 338 MHz memory 100 MHz
nouveau [ CLK][0000:01:00.0] 21: core 275 MHz shader 550 MHz memory 301 MHz
nouveau [ CLK][0000:01:00.0] 22: core 475 MHz shader 950 MHz memory 702 MHz
nouveau [ CLK][0000:01:00.0] --: core 275 MHz shader 550 MHz memory 302 MHz
[TTM] Zone kernel: Available graphics memory: 2022962 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 256 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 01000323 00010034
nouveau [ DRM] DCB outp 01: 02012300 00000028
nouveau [ DRM] DCB outp 02: 02021312 00020010
nouveau [ DRM] DCB outp 03: 010333f1 00c0c080
nouveau [ DRM] DCB conn 00: 0040
nouveau [ DRM] DCB conn 01: 1161
nouveau [ DRM] DCB conn 02: 0200
nouveau [ DRM] DCB conn 03: 0310
nouveau [ DRM] DCB conn 04: 0311
nouveau [ DRM] DCB conn 05: 0313
nouveau W[ DRM] failed to create encoder 0/1/0: -19
nouveau W[ DRM] TV-1 has no encoders, removing
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau [ DRM] MM: using CRYPT for buffer copies
hidraw: raw HID events driver (C) Jiri Kosina
sound hdaudioC0D2: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D2: hp_outs=2 (0xf/0xa/0x0/0x0/0x0)
sound hdaudioC0D2: mono: mono_out=0x0
sound hdaudioC0D2: dig-out=0x21/0x0
sound hdaudioC0D2: inputs:
sound hdaudioC0D2: Internal Mic=0x13
sound hdaudioC0D2: Mic=0xe
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Dell WMI hotkeys as /devices/virtual/input/input8
gpio_ich: GPIO from 462 to 511 on gpio_ich
media: Linux media interface: v0.10
Linux video capture interface: v2.00
input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/0003:0A5C:4502.0001/input/input9
input: HDA Intel Front Headphone Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Front Headphone Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
hid-generic 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0
input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/0003:0A5C:4503.0002/input/input12
hid-generic 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0
nouveau [ DRM] allocated 1440x900 fb: 0x70000, bo ffff8800d9e4c000
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 180x56
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:01:00.0: registered panic notifier
[drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 0
uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input13
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
audit: type=1400 audit(1446964447.360:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=367 comm="apparmor_parser"
audit: type=1400 audit(1446964447.360:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=367 comm="apparmor_parser"
audit: type=1400 audit(1446964447.360:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=367 comm="apparmor_parser"
audit: type=1400 audit(1446964447.360:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=381 comm="apparmor_parser"
audit: type=1400 audit(1446964447.360:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=381 comm="apparmor_parser"
audit: type=1400 audit(1446964447.360:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=381 comm="apparmor_parser"
audit: type=1400 audit(1446964447.360:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=367 comm="apparmor_parser"
audit: type=1400 audit(1446964447.360:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=367 comm="apparmor_parser"
audit: type=1400 audit(1446964447.360:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=381 comm="apparmor_parser"
audit: type=1400 audit(1446964447.360:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=381 comm="apparmor_parser"
init: failsafe main process (524) killed by TERM signal
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
audit_printk_skb: 24 callbacks suppressed
audit: type=1400 audit(1446964452.944:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=668 comm="apparmor_parser"
audit: type=1400 audit(1446964452.944:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=668 comm="apparmor_parser"
audit: type=1400 audit(1446964452.944:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=668 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: cups main process (698) killed by HUP signal
init: cups main process ended, respawning
sky2 0000:09:00.0 eth0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
audit: type=1400 audit(1446964458.052:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=833 comm="apparmor_parser"
audit: type=1400 audit(1446964458.052:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=833 comm="apparmor_parser"
audit: type=1400 audit(1446964458.052:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=833 comm="apparmor_parser"
audit: type=1400 audit(1446964458.052:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=833 comm="apparmor_parser"
audit: type=1400 audit(1446964458.052:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=833 comm="apparmor_parser"
audit: type=1400 audit(1446964458.052:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=833 comm="apparmor_parser"
audit: type=1400 audit(1446964458.256:29): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=832 comm="apparmor_parser"
audit: type=1400 audit(1446964458.256:30): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=832 comm="apparmor_parser"
audit: type=1400 audit(1446964458.256:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=832 comm="apparmor_parser"
audit: type=1400 audit(1446964458.400:32): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=836 comm="apparmor_parser"
wlan0: authenticate with c8:a7:0a:aa:63:66
wlan0: send auth to c8:a7:0a:aa:63:66 (try 1/3)
wlan0: send auth to c8:a7:0a:aa:63:66 (try 2/3)
wlan0: authenticated
wlan0: associate with c8:a7:0a:aa:63:66 (try 1/3)
wlan0: RX AssocResp from c8:a7:0a:aa:63:66 (capab=0x11 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by c8:a7:0a:aa:63:66
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
audit_printk_skb: 123 callbacks suppressed
audit: type=1400 audit(1446964483.986:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1656 comm="apparmor_parser"
audit: type=1400 audit(1446964483.986:75): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1656 comm="apparmor_parser"
audit: type=1400 audit(1446964483.986:76): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1656 comm="apparmor_parser"
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
psmouse serio1: resync failed, issuing reconnect request
wlan0: authenticate with c8:a7:0a:aa:63:68
wlan0: send auth to c8:a7:0a:aa:63:68 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticated
wlan0: waiting for beacon from c8:a7:0a:aa:63:68
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: associate with c8:a7:0a:aa:63:68 (try 1/3)
wlan0: RX AssocResp from c8:a7:0a:aa:63:68 (capab=0x431 status=0 aid=2)
wlan0: associated
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
perf interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 2
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 - driver resynced.
wlan0: authenticate with c8:a7:0a:aa:63:66
wlan0: send auth to c8:a7:0a:aa:63:66 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: send auth to c8:a7:0a:aa:63:66 (try 2/3)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticated
wlan0: associate with c8:a7:0a:aa:63:66 (try 1/3)
wlan0: RX AssocResp from c8:a7:0a:aa:63:66 (capab=0x11 status=0 aid=2)
wlan0: associated
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by c8:a7:0a:aa:63:66
perf interrupt took too long (5023 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
nouveau [ PTHERM][0000:01:00.0] temperature (90 C) hit the 'fanboost' threshold
CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
nouveau [ PTHERM][0000:01:00.0] temperature (86 C) went below the 'fanboost' threshold
nouveau [ PTHERM][0000:01:00.0] temperature (90 C) hit the 'fanboost' threshold
CPU1: Core temperature above threshold, cpu clock throttled (total events = 126)
CPU1: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged